<rp id="hnt3h"></rp>

      <p id="hnt3h"><video id="hnt3h"><ins id="hnt3h"></ins></video></p>
      <progress id="hnt3h"><span id="hnt3h"></span></progress>

            <i id="hnt3h"></i>
            you are here:Home >>Dry Gas Seal>>DGS-FS01_mechanical seal_dry gas seal
            Consulting Products

            Product Name:DGS-FS01

             

            Keywordsnon-contacting dry gas seal, mechanical seal, bi-directional pattern groove, backup seal

             

            Product DescriptionDGS-FS01 Series seals are non-contacting gas seals for dry running vapor containment and full pressure wet backup sealing in light hydrocarbon,crude oil,and hazardous services for long-term, reliable performace.  Fitted with a contacting or non-contacting inboard seal, the low emission disign helps meet the most stringent emissions requirements, especially in light hydrocarbon srvices with avapor disposal system back pressure below 25 psi(1.7 bar). High and low pressure liquid backup seal capability allows for safe and convenient equipment shut down if the primary seal fails at pressures up to 600 psi(41.4bar). Cartridge assembly simplifies installation for a quick and trouble-free start-up. Available as a single seal for equipment such as low pressure blowers and vertical sump pumps where dry running and low emissions are required.

             

            OPERATING LIMITS

            Temperature:

            -40~+204

            Pressure:

            ≤4.14MPa

            Speed:

            30.5m/s

             

             Higher operations conditions also achievable, please contact with world seal engineer:  info@world-seal.com

             

             

             

             

            Rotary Ring:

            SiC/TC

            Stationary Ring:

            Carbon

            Secondary Seal:

            VITON/Kalrez

            Other Parts :

            Hastelloy-C/Duplex/SUS316

            If you have any enquiry about quotation or cooperation, please feel free to email us at info@world-seal.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

            Subject:
            *Message:
            *Name:
            *Business Email:
            ( Please make sure your E-mail address is correct otherwise the recipient will not be able to reply. )
            Company Name:
            Business Phone:
            (Please make sure your Business Phone is correct otherwise the recipient will not be able to reply. )
            Business Fax:
            Business Address:
            Know Us:
            Search Products: A|B|C|D|E|F|G|H|I|J|K|L|M|N|O|P|Q|R|S|T|U|V|W|X|Y|Z|0~9 |

            Copyright ? 2010 WORLD SEAL All Rights Reserved. | Mixer Mechanical Seal

            Send Message
            Close
            欢乐拼三张下载